Center Certification & Testing International
<ul id="yy6ca"></ul> <del id="yy6ca"></del> 
basic introduction
Automobile reliability driving test is to let the car drive on a variety of different roads to comprehensively examine its performance. The various roads used in the test and the mileage of each road surface vary depending on the model, and their requirements are also different. The reliability tests that the car must do include anti-collision test and wear resistance test.
Reliability test item classification
Mechanical behavior | ||
Three comprehensive | Mechanical shock | collision |
HALT | Random vibration | fall |
Sinusoidal vibration | ||
Climate and environmental reliability | ||
High and low temperature | Thermal shock | IP waterproof and dustproof |
Constant temperature and humidity | UV lamp aging | Yanxiu S02 |
Rapid temperature change | ||
Physical performance, life, fatigue reliability | ||
Density | Stretch | Longevity and cheap labor |
Hardness | Bend | Melt flow/Vicat |
Melting point and ash | Elongation at break | Operability |
Wenxing test
It is mainly used to evaluate the adaptability of the use and storage of finished products or components under the conditions of constant humidity, temperature and cycle changes in electrical and electronic products, components, materials, etc. It is the most widely used type of artificial accelerated simulation test in products.
Argon lamp test
It uses lights to simulate the destruction of full-spectrum sunlight, and sprays to simulate the effects of rain, dew, exposure, and darkness. Simulate changes in materials exposed to sunlight in different environments. The material samples are exposed to the light of the arc lamp, heat radiation, and humidity to perform the aging test, thereby evaluating the light resistance and weather resistance of the material.
Vibration test
Refers to the evaluation of the vibration resistance of the product in the expected use environment and the test of the physical or model subject to vibration. According to the type of applied vibration load, the vibration test is divided into sinusoidal vibration test and random vibration test.
Sinusoidal vibration test
Including fixed frequency vibration test and scanning sine vibration test. Simultaneous control of temperature and humidity changes on the basis of vibration testing is called vibration three comprehensive testing.
Test item parameters
HALT and compression test project parameters:
HALT | Compression testing machine | |
Table size | 1220×1220mm | / |
Frequency Range | 10-5000Hz | / |
Acceleration | 60g | / |
temperature range | -100~200℃ | / |
emperature range Temperature conversion rate | 60℃/min | / |
Brand and model | QualMarkTyphoon 4.0+ | Dongguan Haida D-502S-1500 |
Maximum sample size | / | 1500*1500*1200 |
greatest pressure | / | 5 tons |
Test speed | / | /10±3mm/min |
UV, xenon lamp aging test project parameters:
UV aging test box | Xenon lamp aging test box | |||
Light source | UV fluorescent lamp | 6500W water-cooled xenon arc lamp | ||
UVA-340 | 0.68 | 1.38 |
0-1120W/m2（300-800mm） | |
UVA-351 | 0.87 | 1.55 | ||
UVA-313 | 0.67 | 1.23 | ||
PFS-40 | 0.48 | 0.86 | ||
Temperature conditions | / | 20-90%RH | ||
Temperature conditions | Blackboard: 50~85℃ light 40-60℃ dark | Cabinet: RT-90℃ Blackboard: RT~100℃ | ||
Brand and model | Q-PANELQUV/SPRAY | Asia Pacific Rus Ci4000 | ||
General salt spray and circulating salt spray test project parameters:
Ordinary salt spray test chamber | Circulating salt test chamber | |
Inner dimension | 750×570×740mm | 2160×980×1320mm |
temperature range | RT-55℃ (fixed-point temperature) | RT-55C 20~95%RH |
Heating rate | None | 0-1.3℃/min (continuously adjustable) |
Salt spray type | Neutral, acid, copper ion acceleration | Generally neutral |
Salt spray settlement | 1~2ml/80cn3.h | 1~2ml/80cm3.h |
Brand and model | Shanghai Weiss SC/8WT450 Guangzhou Dongzhixu DR160 | British Ascott CC2000IP |
Our advantage
1. With a professional qualification and experienced expert technical team, we can provide you with professional consultation and services.
2. Have advanced laboratory equipment to ensure the accuracy and reliability of test data.
3. As a third-party testing and certification organization trusted by customers worldwide, we are your certificate of quality.
BSCI certification is an abbreviation of BusinessSocialComplianceInitiative, and Chinese is called business social standard certification. BSCI is an organization that advocates the business community to abide by social responsibility. At the same time, it is a non-profit organization.
CMA, the name is \"China Metrology Accreditation\", the abbreviation of \"China Metrology Accreditation\" in English. According to the provisions of Article 22 of the Metrology Law of the People’s Republic of China: “The product quality inspection agency that provides notarized data to the society must be evaluated by the metrological administrative department of the people’s government at or above the provincial level for the capability and reliability of metrological verification and testing. Qualified.\"
Laboratory accreditation is a third-party certification that CNAS has the ability to perform specific testing and calibration work for testing and calibration laboratories.
Automobile reliability driving test is to let the car drive on a variety of different roads to comprehensively examine its performance. The various roads used in the test and the mileage of each road surface vary depending on the model, and their requirements are also different.
Get a quote
Tik Tok
