Center Certification & Testing International
<ul id="yy6ca"></ul> <del id="yy6ca"></del> 
Lithium ion battery PSE certification
Since November 20, 2008, lithium-ion batteries have been included in the scope of NSPs. That is, secondary lithium ion batteries with energy density exceeding 400 Wh / L (used in mobile devices, desktop notebooks, etc.). Except the following lithium-ion batteries:
A: Lithium ion batteries used in medical equipment, industrial equipment and automobiles;
B: A battery that cannot be easily removed by welding or other methods to the product;
C: Special structure battery
PSE round test standard
JISC8711: secondary lithium battery
JIS C 8712: Used for portable sealed alkaline secondary battery box battery pack-safety requirements
JIS C 8714: Removable lithium-ion secondary batteries and battery packs for use in portable electronic devices-safety testing
Battery PSE certification test range
1. Continuous low-rate charging
2. Vibration
3. Moulded case stress at high ambient temperature
4. Temperature cycling
5. Incorrect installation of a cell (nickel systems only)
6. External short circuit
7. Free fall
8. Mechanical shock
9. Thermal abuse
10. Crushing of cells
11. Low pressure
12. Overcharge for nickel systems
13. Overcharge for lithium systems
14. Forced discharge
15. Cell protection against a high charging rate (lithium systems only)
16. Free fall of batteries
17. External short circuit of batteries
18. Function of the overcharge protection of batteries
19. forced interal short-circuit test
BSCI certification is an abbreviation of BusinessSocialComplianceInitiative, and Chinese is called business social standard certification. BSCI is an organization that advocates the business community to abide by social responsibility. At the same time, it is a non-profit organization.
CMA, the name is \"China Metrology Accreditation\", the abbreviation of \"China Metrology Accreditation\" in English. According to the provisions of Article 22 of the Metrology Law of the People’s Republic of China: “The product quality inspection agency that provides notarized data to the society must be evaluated by the metrological administrative department of the people’s government at or above the provincial level for the capability and reliability of metrological verification and testing. Qualified.\"
Laboratory accreditation is a third-party certification that CNAS has the ability to perform specific testing and calibration work for testing and calibration laboratories.
Since November 20, 2008, lithium-ion batteries have been included in the scope of NSPs. That is, secondary lithium ion batteries with energy density exceeding 400 Wh / L (used in mobile devices, desktop notebooks, etc.).
Get a quote
Tik Tok
